Cisco 10000 Series Configuration Manual page 18

Description
Added the
Card Configuration"
purposes. Subinterfaces cannot be configured on this interface.
Changed the format of the Guide Revision History.
Cisco IOS Release
Release 12.2(28)SB
Description
Added
Added the 4-Port Channelized T3 Half-Height line card to the list of supported line cards in
"Provisioning a Subrate E3 or T3
Added the "Controlling the S1 SONET Overhead Byte" section to the configuration chapters for the:
4-Port OC-3/STM-1 ATM line card, 1-Port OC-12 ATM line card, 6-Port OC-3/STM-1 Packet over
SONET line card, and 1-Port OC-12 Packet over SONET line card.
Removed a chapter on configuring MLP connections. Refer to the MLP information in the
Series Router Software Configuration Guide
Configuration
Cisco IOS Release
Release 12.3(7)XI7
Description
Retired OL-0716-10 and created this guide with the same organization as the Cisco 10000 Series Router
Line Card Hardware Installation Guide, using a book part for each type of line card, such as ATM.
Because more up-to-date and complete information is included in the
Software Configuration Guide
Qos and APS chapters were not ported to the new guide.
Removed several sections that have been moved to more appropriate locations in other guides:
•
•
•
•
•
Incorporated information on provisioning a subrate E3 or T3 interface, formerly documented in a feature
guide, as
Added the minimum IOS releases that are supported by each line card.
Revised information for preprovisioning a line card.
Cisco 10000 Series Router Line Card Configuration Guide
xviii
"Management Port" section on page 9-2
to indicate that the Fast Ethernet interface 0/0/0 is only used for management
Part Number
OL-8834-02
Chapter 4, "4-Port Channelized T3 Half-Height Line Card
Guide.
Part Number
OL-8834-01
Configuring the router at startup (moved to the
Router Hardware Installation
Managing file systems (moved to the
Hardware Installation Guide)
Managing PRE redundancy (moved to the
Installation)
Upgrading software (moved to the
Installation)
Managing system boot parameters (moved to the
Chapter 17, "Provisioning a Subrate E3 or T3 Interface"
of Chapter 9, "8-Port Fast Ethernet Half-Height Line
Interface".
and the Cisco 10000 Series Quality of Service
and the Cisco 10000 Series Quality of Service Configuration
Cisco 10008 Quick Start Guide
Guide)
Cisco 10008 Quick Start Guide
Cisco 10000 Series Router Performance Routing Engine
Cisco 10000 Series Router Performance Routing Engine
Cisco 10008 Router Hardware Installation
Publication Date
March, 2006
Configuration".
Publication Date
December, 2005
Cisco 10000 Series Router
and the
and the Cisco 10008 Router
in this guide.
About This Guide
Chapter 17,
Cisco 10000
Guide, the
Cisco 10008
Guide)
OL-8834-04