®
B r a k e H o s e a n d L i n e I n s p e c t i o n
1. Inspect the brake hoses for damage, deterioration, leaks, interference, and t w i s t i n g .
2. Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines.
3. Check for leaks at hose and line joints and connections, and retighten if necessary.
4. Check the master cylinder and ABS/TCS modulator-control unit for damage and leakage.
NOTE: Replace the brake hose clip whenever the brake hose is serviced.
M A S T E R CYLINDER-to-BRAKE LINES
15 N-m (1.5 k g f m , 11 Ibfft)
BRAKE LINE-to-BRAKE H O S E
15 N m (1.5 kgf m, 11 Ibfft)
B R A K E LINE-to-BRAKE H O S E
15 N m (1.5 k g f m , 11 Ibfft)
BRAKE HOSE-to-CALIPER
(BANJO BOLT)
34 N m (3.5 k g f m , 25 Ibfft)
B L E E D S C R E W
9.0 N-m (0.9 k g f m , 7 Ibfft)
A B S / T C S M O D U L A T O R - C O N T R O L UNIT-to
BRAKE LINES
10 x 1.0 m m F L A R E - N U T S :
15 N m
(1.5 k g f m , 11 Ibfft)
BRAKE LINE-to-BRAKE HOSE
12 x 1.0 m m F L A R E - N U T S :
15 N-m (1.5 kgf m, 11 Ibfft)
22 N m
(2.2 k g f m , 16 Ibfft)
BRAKE HOSE-to-CALIPER
(BANJO BOLT)
34 N m (3.5 kgf m, 25 Ibfft)
B L E E D S C R E W
9.0 N m (0.9 k g f m , 7 Ibfft)
19-27