Table of Contents
Advertisement
5.7.8. Supply and Take-up Brake Arm Unit Replacement
(Removal of Brake Arm Unit)
1. Remove the top panel.
2. Remove the front loading unit.
3. Push the supply and take-up brake solenoids to release brake.
4. Remove 2 cut washers (A) and remove supply and take-up brake
arm unit.
(Installation of Brake Arm Unit)
1. Install new supply and take-up brake arm units as reverse order of
removal.
Note:
Hook the brake arm spring at the position shown in the figure.
2. After the Brake Arm Unit Installation, confirm the Main Brake
Torque. (Refer to the Main Brake Torque Confirmation.)
5.7.9. Supply Brake Solenoid Replacement and Adjustment
(Removal of Supply Brake Solenoid)
1. Remove the top panel.
Installation of Reel Rotor Unit
Reel Brake Arm Unit Replacement
60
Advertisement
Chapters
Table of Contents
