Table of Contents
Advertisement
Servo reference
This unit automatically selects the input video signal selected by the INPUT switch, the
reference video signal supplied from the REF VIDEO input connector or the internal sync
signal as the servo reference signal.
When the signal is selected, the unit's mode and servo reference stand in the relationship
shown in the flowchart presented below.
1
What is the SERVO REF on the setup
menu No. 304 setting?
AUTO
2
Is the unit in the recording mode?
NO
3
Is the unit in the editing mode?
(Is VIDEO, CH1, CH2, CH3, CH4, CUE
or TC selected?)
NO
4
Is the REF VIDEO signal supplied?
YES
The REF VIDEO input
signal serves as the
reference signal.
EXT
YES
YES
BB/CB
NO
NO
The internal sync signal
serves as the reference
signal.
– 65 –
What is the setup menu
No. 600 (INT SG) setting?
OFF
Is the input video signal
available?
YES
The input video signal
serves as the reference
signal.
Advertisement
Chapters
Table of Contents
