Panasonic DVC PRO Studio AJ-D950P Service Manual page 811

.
3-6-19 A/C Head Tilt Confirmation
Specification A/Amax = 0.8 or more
Test Point TP101 (CUE:H1)
Adjustment Screw A, G (A/C Head)
Mode PLAY
Tape VFM3580KM (No.1)
M. EQ. Oscilloscope
Tool VFK1178,VFK1148 (Hex Wrench)
1. Playback the alignment tape CUE audio 6
kHz portion.
2. Confirm that screw G and H are tighten.
3. Connect a scope to TP101 and move the
tension arm to B direction until T2 post is
not moved, then confirm the output level
variation is in the specification.
4. If it is not loosen screw G and adjust screw
A then tighten screw G with 1.0 Kg torque.
5. It is necessary to complete the adjustment
with screw A tighten and confirm that screw
A is not loosen.
6. If this is adjusted confirm the Play Limit
Confirmation (PLAY).