Panasonic DVC PRO Studio AJ-D950P Service Manual page 829

.
3-6-36 PB Head LISTA Sensitivity Adjustment (25M Mode)
Specification Sensitivity 150+/-15 (mV/um)
Mode
SERVO Adjustment Menu "A11 PB GAIN DP"
Test Point (1) ATF:TP732 (2) HSW:TP723(PB HSW) (not TP722(RP HSW) (3) GND:TG510
Adjustment
SERVO Adjustment Menu: " A11 PB GAIN DP"
Tape VFM3581KM or VFM3581KL
1. Open the Service Menu and select " A11 PB GAIN DP" in the " SERVO ADJUST" menu.
2. Playback a LISTA alignment Tape (VFM3581KM).
3. Select LISTA Main Menu " (6) ATF Error Signal Monitor" Press enter when " 1.2% Speed..." is appeared to start
the Sensitivity measurement.
4. When the picture is appeared as shown in figure adjust ATF Gain so that the " Sens. Value:• h is in the
Specification.
5. After Adjustment press ESC key to return the main menu.
Adjustment Value