Panasonic DVC PRO Studio AJ-D950P Service Manual page 471

USER menu
<EDIT>
No.
300
301
302
303
304
305
306
307
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
VAR 0000
RANGE 0001
IN/OUT 0000
DEL 0001
NEGA 0000
FLASH 0001
STD/ 0000
NON-STD 0001
0002
SERVO 0000
REF 0001
EDIT 0000
RPLCE1 0001
0002
0003
EDIT 0000
RPLCE2 0001
0002
0003
EDIT 0000
RPLCE3 0001
0002
0003 CH1+CH2
– E-53 –
– .43~1 This sets the VAR speed range.
0: The tape is played in slow motion at a speed ranging from
– 4~+4
–0.43× to +1× normal speed.
1: The tape is played in the ±4.1× normal speed range.
MANU This selects the operation to be performed when an edit point
has been set incorrectly (when the OUT point is before the IN
AUTO
point).
0: Editing is not executed unless the illegal edit point is
cleared or set again properly.
1: The edit points already input are automatically cleared.
OFF This selects whether to show a negative display when the IN
point is greater than the OUT point.
ON
0: No negative display.
1: Negative display.
AUTO This selects STD or NON-STD in accordance with the compo-
site input signal.
STD
0: Standard/non-standard signals are automatically identified
N-STD
and processed.
1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)
AUTO This selects the video signal processing.
0: Servo is synchronized with the input signal during recording
EXT
and editing, or with the REF signal during playback.
1: Servo is synchronized at all times with the REF signal.
This sets the channel assignments for the controller's analog
N-DEF
audio preset when editing the digital audio of the VTR using a
CH1
controller which does not have a digital audio edit preset
CH2
control function.
CH1+2
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
N-DEF This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
CH1
the analog audio signals designated by the controller.
CH2
0: Not set.
CH1+2
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
N-DEF The same type of setting as No. 305. This selects the channel
concerned when the VTR CH3 edit preset is set in compliance
CH1
with the On or OFF presetting for the analog audio signals
CH2
designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
Description