Table of Contents
Advertisement
3-3. Disassembly Method
3-3-1. Removal of Top Panel
Loosen 2 screws.
Loosen 2 screws and remove the top panel.
3-3-2. Removal of Bottom Panel
(1) Loosen the screw 1.
(2) Remove the 4 screws numbered 2.
(3) Slide the bottom panel and remove it.
3-3-3. Removal of Upper Front Panel
(1) Remove the 4 screws at right and left, then
draw the upper front panel.
2
3
1
2
3-3-4. Removal of Front Panel
(1) Remove the 4 screws at left and right. Then
draw it and remove the connector and remove
the Front Panel.
3-3-5. Removal of Front Loading
Unit
(1) Remove the connectors at front loading motor
and interconnection board. Then rotate the
emergency eject gear (red) counterclockwise
until the screw which is used to fix the front
loading u can be seen.
Remove 2connectors.
(2) Remove the 4 screws of the loading unit as shown
below.
Advertisement
Chapters
Table of Contents
