Operation Menu - Panasonic DVC PRO Studio AJ-D950P Service Manual

Vtr/analog video interface kit

Table of Contents

The underline on the setting item denotes the initial setting.

Memory stop function

z When the FF button is pressed, the VTR performs the regular fast forward operation since the zero point is not located in the

direction of operation.

x When the REW button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the

preroll operation, and it automatically stops when it reaches the position where the counter reads "0."

c When the REW button is pressed, the VTR performs the regular rewinding operation since the zero point is not located in the

direction of operation.

v When the FF button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll

operaiton, and it automatically stops when it reaches the position where the counter reads "0."

Superimposed

FWD direction

This selects the CAPSTAN LOCK mode for the 4F and 8F

settings of the CF switch.

This setup menu is not displayed in the 525 mode.

This selects whether to rewind the tape automatically to the

tape start when the tape end is detected.

0: The tape stops at the tape end.

1: The tape is rewound to the tape start.

This selects whether the VTR is to stop automatically when

the counter value reaches "0" during a fast forwarding or

rewinding operation in the CTL mode.

0: The VTR does not stop.

1: The VTR stops automatically.

1. The stop mode concerned is either the stop or the still-

picture (SHTL STILL) mode depending on the setup menu

No. 315 (AFTER CUE-UP) setting.

2. When both the AUTO REW function and MEMORY function

have been selected at the same time, the AUTO REW

function takes precedence.

The MEMORY STOP function does not work if it is

activated within a range of 0 ±2 frames.

Chapters

Table of Contents