Removal of Mode Switch Unit
3-7-15. Main Cam Gear Replacement
(Removal of Main Cam Gear)
1.
Remove the top panel.
2.
Remove the front loading unit.
3.
Remove the Pinch Solenoid Unit and Loading
Motor Neutral Unit. (Refer to Loading Motor
Replacement and Pinch Arm Unit Replacement.)
4.
Remove the Main Cam Gear.
(Installation of Main Cam Gear)
1.
Install a new Main Cam Gear in reverse order of
its removal. For this installation, set the pin of the
Income Arm Unit to the groove of the Main Cam
Gear.
Removal of Main Cam Gear