Table of Contents
Advertisement
front bottom panel.
2. Release the Reel brake by pressing the iron axis of the T Reel
Brake Solenoid. This is done by a thin stick from the VTR front.
3. Rotate the red plastic screw by a Phillips - head screwdriver to
Counterclockwise (CCW ) keep pushing the screw. It needs to
rotate about 30 times rotation until starting to move.
4. When the post is unloaded, the tape loosens, so take-up reel must
be wound the tape to protect tape loosen. The tape wind method
is ; inserting a wood stick (non magnetized) between the cassette
and mechanism chassis from the front and rotate the T Reel to the
tape wind direction.
14
Advertisement
Chapters
Table of Contents
