Siemens Sinumerik 840D sl Function Manual page 553

10/15
Details
Figure 9-4 Detailed view
The most important detailed information about the active safety functions is
displayed in the "Overview -- Details" window:
S Extended functions:
For extended functions, the settings from parameter p9501 are evaluated and
displayed for enabled functions.
S Basic functions:
For the basic functions, the settings from parameters p9601, p9602, p9652 are
evaluated and displayed if the function has been released.
S Status symbols:
The parameters are evaluated through two channels. The status symbols
indicate as to whether the parameters are identical in both channels.
Green: Parameterization in the 1st and 2nd monitoring channels identical
Red: Parameterization in the 1st and 2nd monitoring channel different
S Control:
The control of the particular safety function is displayed in the right--hand
column.
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
9.1 Pictures of the user interface and softkeys
Commissioning
9-553