Siemens Sinumerik 840D sl Function Manual page 375

10/15
13322
MD number
Default value 0.0
Change becomes effective after: POWER ON
Data type: DOUBLE
Meaning:
corresponds with ...
Additional references
13330
MD number
Default value 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
corresponds with ...
Additional references
13331
MD number
Default value 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
corresponds with ...
Additional references
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
$MN_INFO_SAFE_SRDP_CYCLE_TIME
Maximum F_DP communication clock cycle
Min. input limit: - -
Protection level: 7/0
Display data:
Displays the maximum time grid in which F_DP communication takes place for plant/
system coupling, which is operated via the OB40 on the PLC.
The value is obtained from the interpolator clock cycle and MD13320
$MN_SAFE_SRDP_IPO_TIME_RATIO.
When the set communication clock cycle is exceeded, this is also displayed here.
In the case of an incorrect parameterization (communication clock cycle exceeds the
maximum value of 250.0 ms) then the maximum value that can be set is displayed.
$MN_SAFE_SDP_ENABLE_MASK
Enable screen form F_SENDDP communication relationships
Min. input limit: 0
Protection level: 7/2
Enable screen form for the individual F_SENDDP communication relationships and their
SPL couplings.
$MN_SAFE_SDP_ID[0...15]
Identifier of the F_SENDDP communication relationship
Min. input limit: - -32768
Protection level: 7/2
Any value that is unique throughout the network as identifier of the F_SENDDP
communication relationship.
SIMATIC block parameters: DP_DP_ID
8.1 Machine data for SINUMERIK 840D sl
Max. input limit: - -
Max. input limit: 0xFFFF
max. input limit: +32767
Data Description
Unit: s
Unit: - -
Unit: - -
8-375