Panasonic LP-V Series Operation And Maintenance Manual page 62

⿎ Installation Direction
Standard Head Model
The standard head can be mounted in the following direction. After the installation, the scanner unit can be rotate. Refer to
"2-1-3 Rotation of LP-400 Standard Head Scanner" (P.64).
Tower Head Model
When the mounting surface of the tower head is rear side, it can be mounted in the left, right, top and bottom direction.
When the lens side is mounting surface, install the tower head always with the lens side down.
Notice
• Do not incorporate the laser marker in a unit where the laser head will be moved. It may cause failure.
• When install the head with the lens side up, clean the laser emission port and remove the marking dust regularly.
• When the lens side of the tower head is mounting surface, never install it with other directions than described above
figure.
62
ME-LP400V-OP-6