Communication, I/O Setting (Environment 3) - Panasonic LP-V Series Operation And Maintenance Manual

4-16-3 Communication, I/O Setting (Environment 3)

Reference
• Setting of Environment 3 is saved without overwriting.
1
3
⿎ Input/Output
This screen specifies the settings related to the signals on the output terminal and I/O connector.
Item
1 One-shot time
Reference
• In case the marking time is shorter than the set one-shot output time, the marking output remains ON until the one-
shot output time ends.
• "E623 Too narrow marking interval for proportioned flying object" is generated at equidistant marking to flying object
when the setting of one-shot time is longer than the period in which the line moves the distance specified at "Interval".
2 Detect TRIG.
Warning during
Marking
3 I/O Connector
Setting
2
Description
: Sets the output duration for the following signals.
There is a margin of error between the setting value and actual output time.
• MARK END OUT
• SET OK OUT
• TRIG. WARNING of E800
Setting Range 2 to 510ms
: Enabling this setting, the warning (E800) to show that the trigger cannot be accepted is
output in case the trigger is input while the shutter is opened.
If the invalid trigger is detected, the warning E800 occurs for the setting one-shot time.
When this function is disabled, the warning does not occur if there is an invalid trigger
input.
:
Select the operation of I/O connector
signal No. 35 from "Output Cntr 3
End" or "Output Date Dif.". Pressing
this button the following screen will
appear.
For the detailed description of each
signal, refer to External Control
Manual.
Output Cntr 3 End
Output Date Dif.
ME-LP400V-OP-6
"Output Cntr 3 End" for the I/O connector No. 35.
"Output Date Dif." for the I/O connector No. 35.
261