Panasonic LP-V Series Operation And Maintenance Manual page 324

„ Setting Value for AUTO Set
When pressing "AUTO" button after setting bar code and referential module width for the following code symbols, GS1
DataBar, GS1 DataBar Truncated, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited,
GS1 DataBar Expanded, GS1 DataBar Expanded Stacked, the following setting value is set automatically with each "W"
(Width) be used as the reference for calculating the setting value.
Setting Screen
Bar Code Condition
Laser Setting
* This setting item is set automatically when selecting GS1 DataBar CC-A, CC-B.
Setting Screen
Bar Code Condition
Laser Setting
* This setting item is set automatically when selecting GS1 DataBar CC-A, CC-B.
324
Setting Item
Bar Code Height
Separator Pattern Height/(W) Ratio *
Quiet/(W) Ratio *
Inversion
Guard
Human Readable Text
Composite Row Height *
Rows Number *
Line Width
Marking Pitch
Marking Quality Adjustment
-Wait Adjustment
Setting Item
Bar Code Height
Separator Pattern Height/(W) Ratio *
Quiet/(W) Ratio *
Inversion
Guard
Human Readable Text
Composite Row Height *
Rows Number *
Line Width
Marking Pitch
Marking Quality Adjustment
-Wait Adjustment
GS1 DataBar/GS1 DataBar Truncated
(Character Height: 6W, Character Width: 5W,
Character Interval: 4.5W, Line Feed: None *, Line
LP-400 series: half of the "Module width"
LP-V/LP-W series: half of the "line width" initial value
LP-400 series: half of the "Module width"
LP-V/LP-W series: same value with the "line width"
GS1 DataBar Stacked
7W
―
(Character Height: 6W, Character Width: 5W,
Character Interval: 4.5W, Line Feed: None *, Line
LP-400 series: half of the "Module width"
LP-V/LP-W series: half of the "line width" initial value
LP-400 series: half of the "Module width"
LP-V/LP-W series: same value with the "line width"
ME-LP400V-OP-6
33W
1
1
Inversion
Available
Available
Interval: 7.5W *)
2W
0 (minimization)
initial value
10
GS1 DataBar Stacked
Omnidirectional
33W
1
1
Inversion
Available
Available
Interval: 7.5W *)
2W
0 (minimization)
initial value
10