Panasonic LP-V Series Operation And Maintenance Manual page 254

⿎ Operator Adjustment Screen/Adjustment Accepted Parameters
The setting parameters that can be set on the operator's adjustment screen are selected. Refer to "4-4 Operator Adjustment
Screen" (P.129).
Description
1 Setting permission:
Check the respective boxes to make the adjustment on the operator's adjustment screen possible.
• Offset
• Line Speed
• Laser Power
• Scan Speed
• Laser Pulse Cycle (Only LP-V series)
• Change File No.
• Overwriting
• Laser Check
2 Editable Lines:
Sets the number of line possible to be edited at the edition of character setting on the operator's adjustment
screen.
Setting Range
Reference
• Setting of password is useful to avoid unintentional change of setting by operator. Setting of parameters only the
specified operators can change is possible, too. Refer to "4-16-1 Display Setting (Environment 1)" (P.253) or "4-3-3
Password to Open the Setting Screen" (P.128) for the setting of password.
254
1
2
0 to 50 lines
ME-LP400V-OP-6