Panasonic LP-V Series Operation And Maintenance Manual page 109

3. Set the pattern.
1.
Press [PATTERN].
2.
Set the code pattern of [Dark Module].
Press [Pattern Code] box for [Dark module].
3.
Input screen of painting pattern for the modules in QR
code is displayed.
Select a pattern and press [SET].
Reference
• If a reading failure occurs with the standard pattern, use the font maker provided to created the proper pattern. Refer to
"Font Maker Operation Manual" for details.
• 2D code pattern can be also set using the character code. Press [JIS Code] to open the ten-key pad, and then input the
character code.
4.
Press [IMAGE] to check the marking layout.
ME-LP400V-OP-6
1
2
109