Panasonic LP-V Series Operation And Maintenance Manual page 327

DXF Version Entity Name
3DSOLID
ACAD_PROXY_
ENTITY
BODY
ELLIPSE
HATCH
IMAGE
LEADER
LWPOLYLINE
R13J, R14
MLINE
MTEXT
OLEFRAME
OLE2FRAME
RAY
REGION
SPLINE
TOLERANCE
XLINE
ARCALIGNEDTEXT
R14
(Used Express
RTEXT
Tools)
WIPEOUT
* For the applicability of the function, "Y" means "applicable" and "N" means "not applicable for this laser marker".
Reference
• The DXF file including entity not applicable to the laser marker cannot mark.
• In the case of setting CAD marking magnification for laser marker to "under 1X", the graphic including curve is not
marked as just the preset marking image.
• In the case of marking the CAD data created/output by AutoCADLT after converting by the logo data conversion
software, all graphics might not be marked as just the preset marking images.
Applica-
Graphic Name
bility*
3D paint N
Proxy graphic N
Body N
Ellipse Y
Hatching Y
Image N
Lead line N
Light Weight polyline Y
Multi-line N
Multi-text Y
OLE frame N
OLE2 frame N
Radiation (half line) Y
Region N
Free curve Y
Geometric tolerance N
Line (straight line) Y
Character string on
N
arc
Reference character
N
string
Masking graphic N
ME-LP400V-OP-6
Remarks
Converted into segment and output.
Target graphic: segment, arc, ellipse only.
Hatching pattern is reproduced for all painting.
Converted arc into segment and output.
Bold line is not correspondable.
Converted character with specified font into
segment and output.
Output with segment.
Converted into segment and output.
Output with segment.
327