Panasonic LP-V Series Operation And Maintenance Manual page 316

„ GS1 DataBar Limited
Name
1 Left Guard Pattern
2 Right Guard Pattern
Reference
• For better bar code reading quality, in this laser marker, the rightmost space of the right guard pattern consists of six
modules, adding one extra module to that of the standard when it is set to ISO/IEC 24724 2011.
3 Data Character
4 Check Character
5 Bar Code Height
Content of code data
• GS1 DataBar Limited indicates the numerical (0 to 9).
• The data consists of application identifier "01" and 13-figure numerical characters.
• The application identifier indicates the content of data and automatically added.
• The data that can be bar-coded is "0000000000000" to "1999999999999". The data "2000000000000" or more cannot
be bar-coded.
316
Description
Provides the bar code area of the left side. It consists of bars and spaces of one module
(minimum unit consisting of bars and spaces).
Provides the bar code area of the right side. ISO/IEC 24724 standard specifies it as
follows. (The number in parentheses indicates the number of modules.)
ISO/IEC 24724 2011: combination of (1) space, (1) bar, and (5) space
ISO/IEC 24724 2006: combination of (1) space and (1) bar
Has the (n, k) structure. "n" indicates the number of modules and "k" indicates that of
bars and spaces that make up the character. This data character is composed with 7
bars and spaces consisting with 26 modules. The element is arranged from left to right
as shown in the figure above.
This check character is composed with 7 bars and spaces consisting with 18 modules,
and it is set between 2 data characters. It is used to check if the read data is correct
or not by putting the value calculated with the certain formula on just before the stop
character for re-calculation.
The minimum value of bar code height is 10 times as high as the module width.
ME-LP400V-OP-6
5. Bar Code Height