Panasonic LP-V Series Operation And Maintenance Manual page 203

⿎ Human Readable Text
Specifies the human readable text settings of the following code symbols.
• CODE128
• GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Expanded
• GS1 DataMatrix
• Composite codes
Reference
• "FNC1" and control codes are not shown in the human readable text at the marking.
• For EAN / UPC code, the human readable text is marked with the font registered in character font 1 and with the
specified text size and position according to the code standard. To laser power, scan speed and pulse cycle (only for
LP-V series) for the human readable text of EAN / UPC code, the setting parameters in Laser Setting screen are applied.
1
2
3
4
5
Description
1 Relative X Position, Relative Y Position :
Specifies relative coordinate of X/Y position of Human Readable Text when the center of the code is defined as the
origin point.
-45.000 to +45.000 mm
-55.000 to +55.000 mm
Setting Range
-80.000 to +80.000 mm
-27.500 to +27.500 mm
2 Character Height, Character Width :
Specifies the character height / width of Human Readable Text.
0.100 to 90.000 mm
0.100 to 110.000 mm
Setting Range
0.100 to 160.000 mm
0.100 to 55.000 mm
3 Character Interval :
Specifies the character interval of Human Readable Text.
0.000 to 90.000 mm
0.000 to 110.000 mm
Setting Range
0.000 to 160.000 mm
0.000 to 55.000 mm
8 9
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
ME-LP400V-OP-6
6
7
10 11
203