Panasonic LP-V Series Operation And Maintenance Manual page 60

• Removing the dust and smoke
Remove any dust and smoke from the laser emission port and laser beam path using a dust collector. For effective dust
collection, put the suction port of the dust collector near the lasing part. In an environment where dust and smoke that
tend to attach to the lens surface, it is recommended to create a compression air flow to ensure thorough dust collection.
In such situation, clean the laser emission port regularly.
• Protection against electrical noise
If there are devices that generate electrical noise such as a motor or the objects that generate static electricity around
the laser marker, the laser marker can be damaged by the noise.
Securely ground the frame ground terminal of the laser marker.
Depending on the grounding environment, use the noise cut-off transformer or uninterruptible power supply system.
Position of the frame ground terminals
60
Compressed Air
LP-400 series LP-V/LP-W series
Controller Controller
LP-V/LP-W series
Head
ME-LP400V-OP-6
Dust Collector