Cross-Point Control Block - Sony DVS-9000 User Manual

Cross-Point Control Block

In the cross-point control block, you can
select the signals to be used in this M/E
bank or PGM/PST bank.
There are also modules without the source
name displays shown in the following
figure.
Key 2 row
Key 1 row
Background B row
Background A row
5 Source name displays
a Cross-point buttons
These buttons select the signals used for
video creation on this M/E bank or PGM/
PST bank. Each row of buttons corresponds
All operations except those of the [SHIFT]
button are the same as for a module with
source name displays.
1 Cross-point buttons
Reentry buttons
7 M/E bank display
M/E M/E M/E
SHIFT
1 2 3
M/E M/E M/E
SHIFT
1 2 3
SHIFT
M/E M/E M/E
SHIFT
1 2 3
M/E M/E M/E
SHIFT
1 2 3
2 XPT HOLD buttons
Reentry buttons
6 SHIFT button
to one or more signal buses within the
switcher.
Key 1 row: The buttons in this row select
the key 1 or key 3 signals to be inserted
Names and Functions of Parts of the Control Panel
3 Key bus selection buttons
XPT
KEY3
HOLD
XPT
KEY4
HOLD
PRE POST
MCRO MCRO
MCRO
XPT
ATTCH
HOLD
ENBL
XPT
UTIL
HOLD
8 Macro buttons
4 UTIL button
53