Image 2: State with [Effect Gp1] only set to On
Portion 2 has 'Mono'
masked, and 'Defocus'
only applied.
m
In the state corresponding to image 2, if you switch [Effect Gp2] to On, then
the mask should be applied to portion 2 only, but in fact the border or beveled
edge is also masked.
Image 3: State with [Effect Gp1] and [Effect Gp2] set to On
Freeze Settings
Freezes the input video. The following types are available:
Hard Freeze: Freezes the input video at an arbitrary timing.
Time Strobe: Freezes the input video at specified intervals for a specified
Film: Slows the apparent frame rate, for an effect like film. You can specify
For Hard Freeze and Time Strobe, you can select the first field or the frame as
the freeze timing.
To apply a Freeze effect, start by displaying the Freeze menu. In the DME
menu, select VF3 'Freeze' and HF1 'Freeze.'
578
DME Special Effect Operations
The border or beveled
edge effect is also
masked.
length.
the ratio of advancement.
2
1
2
1
Portion 1 has both
'Mono' and 'Defocus'
applied.