Sony DVS-9000 User Manual page 245

a) In the "4H mode" and when [Fine Key] (page 226) is on, the setting value range is 0 to 4.
When [Outline] is selected with separate edge on, the [MORE] button lights
amber. Pressing the [MORE] button to turn it green then allows you to adjust
the key fill density parameter with a knob.
Knob
4
Setting the embossing parameters
When the [EMBOS] button is lit green, adjust the following parameters.
Knob
1
2
4
Selecting a normal edge
When all five edge type selection buttons are off, a normal edge is selected. If
one of the buttons is lit, press it, turning it off.
Softening the edge
Press the [SOFT EDGE] button, turning it on. The button lights green, and you
can now adjust the softness with the knob.
Knob
1
• For a normal edge, when [SOFT EDGE] is enabled, "Key Drop" mode turns
on.
• When a luminance key or linear key is selected as the key type, and clean
mode is enabled, enabling [SOFT EDGE] ends the clean mode.
Applying the zabton effects
When the [ZABTN] button is lit green, adjust the following parameters.
Knob
1
2
Press the [MORE] button lit amber, changing it to green, then adjust the
following parameters.
Parameter Adjustment
Density Outline density
Parameter Setting values
Width 0 to 4
Position 359 to 0
Density 0 to 100
Parameter Adjustment
Soft Edge softness
Parameter Adjustment
Size Pattern size
Soft Pattern edge softness
Setting values
0 to 100
Setting values
0 to 100
Setting values
0 to 100
0 to 100
Key Setting Operations With the Key Control Block
245