Sony DVS-9000 User Manual page 342

• Create the last keyframe with the image inverted so the back side is visible,
• In the <Transition Mode> group of the Key Frame >DME User PGM menu,
Notes on frame in-out (one-channel mode)
Create a minimum of three keyframes.
• Either create the first keyframe image outside the screen area, or set the
• Create the first transition to end such that the image can be seen within the
• Either create the last keyframe image outside the screen area, or set the image
• In the <Transition Mode> group of the Key Frame >DME User PGM menu,
Notes on Frame in-out H (one-channel mode)
Create a minimum of three keyframe points.
• Either create the first keyframe image outside the screen area, or set the
• As the state after completion of the first transition, move the image
• For the last keyframe move the image horizontally to place it outside the
• In the <Transition Mode> group of the Key Frame >DME User PGM menu,
Notes on frame in-out V (one-channel mode)
Create a minimum of three keyframe points.
• Either create the first keyframe image outside the screen area, or set the
• As the state after completion of the first transition, move the image vertically
• For the last keyframe move the image vertically to place it outside the screen
• In the <Transition Mode> group of the Key Frame >DME User PGM menu,
Notes on picture-in-picture (one-channel mode)
Create a minimum of three keyframes.
342
Creating User Programmable DME Patterns
and with the size at full size.
select [Flip Tumble].
image size to zero so that it cannot be seen within the screen.
screen. At this point, press the [PAUSE] button in the keyframe control
block, turning it on, to set a pause for the keyframe.
size to zero so that it cannot be seen within the screen.
select [FRAME I/O].
image size to zero so that it cannot be seen within the screen.
horizontally to make it visible within the screen. At this time, press the
[PAUSE] button in the keyframe control block, turning it on, to set a pause
for the keyframe.
screen area or set the image size to zero, so that the image is not visible
within the screen.
select [FRAME I/O H].
image size to zero so that it cannot be seen within the screen.
to make it visible within the screen. At this time, press the [PAUSE] button
in the keyframe control block, turning it on, to set a pause for the keyframe.
area or set the image size to zero, so that the image is not visible within the
screen.
select [FRAME I/O V].