Sony DVS-9000 User Manual page 226

8
Carrying out a color mix for the key edge fill matte
When you select 'Matte' for the edge fill of a border, drop border, or shadow,
you can create a combination of color 1 and color 2 using a wipe pattern
generated by the dedicated pattern generator.
1
2
3
226
Key Setting Operations Using Menus
To make separate fine adjustments to the positions of the left, right, top,
and bottom of the source edge, press [Fine Key], to set it on, and adjust the
following parameters.
Knob Parameter Adjustment
1 Top Key top edge position
2 Left Key left edge position
3 Right Key right edge position
4 Bottom Key bottom edge position
Knob Parameter Adjustment
1 H Phase Key horizontal position
2 V Phase Key vertical position
Note
In the emboss function it is not possible to set [Fine Key] on.
• When the edge type is normal, drop border or shadow, enabling the [Fine
Key] function keeps [Key Drop] on.
• When applying a border to the key edge, enabling the [Fine Key]
function halves the border width setting range.
In the <Edge Fill> group of the Edge menu, select [Matte], then press
[Matte Adjust].
The edge fill Matte Adjust menu appears.
In the <Edge Matte> group, select [Mix Color], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Size Pattern size
Parameter group [1/2]
Parameter group [2/2]
Setting values
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
Setting values
Left edge position
value shown
Top edge position
value shown
Setting values
0.00 to 100.00