The parameter Speed determines the speed of waves.
A value of –100.00 generates the maximum counterclockwise speed of waves,
and a value of +100.00 the maximum clockwise speed.
You can apply modulation independently to the main pattern and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
H (Horizontal modulation): Modulate the pattern, applying waviness in
the horizontal direction to edges.
V (Vertical modulation): Modulate the pattern, applying waviness in the
vertical direction to edges.
Fringe (Radial modulation): Modulate the pattern, applying waviness in
the radial direction to edges.
3
Set the following parameters.
.
Knob
1
2
3
4
Applying barrel or pincushion distortion to the edge of the wipe
pattern (Spring)
As the transition progresses, the edge of the pattern is subjected to barrel or
pincushion distortion.
Parameter
Adjustment
Amplitude
Amplitude of modulation
Frequency
Frequency of modulation
Speed
Speed of waves
Shape
Form of the modulation
Spring off
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
1 to 3
Spring on
Basic Procedure for Wipe Settings
289