Video Process Memory - Sony DVS-9000 User Manual

Making the adjustments
Adjust VIDEO GAIN, Y GAIN, BLACK LEVEL, C GAIN, and HUE DELAY
in the following menus.
Applicable bus
M/E-1 to M/E-3
banks
PGM/PST bank
Frame memory source 1 and 2 buses
Aux 1 to 48 buses

Video Process Memory

When using video process adjustments for an image effect on a bus, this
function saves the final values for each pair number for the signals. The video
process on/off setting is not saved.
When you change the adjustments the values are automatically saved, and
these last values are recalled when the pair number is selected.
In other words, by switching video process memory on, regardless of the video
process information for each bus, you can carry out video process adjustments
for each input signal.
The parameters saved are as follows.
VIDEO GAIN, Y GAIN, BLACK LEVEL, C GAIN, HUE DELAY
Switch the video process memory on or off in the Setup menu.
For details of setting operations, see "Settings Relating to Keys, Wipes, Frame
Memory and Color Correction (Key/Wipe/FM/CCR Menu)" in Chapter 20
(Volume 3).
Menu used for operation See page
Key fill buses for keys M/E-1 to M/E-3 menus
1 to 4
Background A and B Video Process menu
buses
Utility 1 and 2 buses
Key fill buses for PGM/PST menu
DSK1 to DSK4
Background A and B Video Process menu
buses
Utility 1 and 2 buses
Frame Memory menu
AUX/MON menu
page 237
page 420
page 237
page 420
page 364
page 414
419
Video Process