Recalling A Continuous Sequence Of Still Images (Animation) - Sony DVS-9000 User Manual

8
If required, set video processing for the selected signal.
For details of the operating procedures, see "Setting video processing"
(page 364).
9
Press [Record], to start recording.
When the recording time is set, recording stops once the time has elapsed.
10
Press [Stop] to stop recording.
Even if the recording time is set, you can still stop recording before the set
time has elapsed.
Recalling a Continuous Sequence of Still Images
(Animation)
You can use a continuous sequence of images captured with the record function
as keyframes to create an effect. By executing this effect you can recall the
continuous sequence (animation).
Notes
• For example, to create an effect using FM1, FM1 must be assigned to a user
region.
• To execute the effect, you must assign the user region to which FM1 is
assigned to a region selection button in the numeric keypad control block and
the Multifunction Flexi Pad control block. (For details of assigning to region
selection buttons, see Chapter 19 "Control Panel Setup (Panel)" (Volume
3).)
In the Frame Memory menu, effect creation follows the image file names. Of
the eight characters in the file names, if files have the same characters except
for the last three characters they are treated as an image file group, and the
effect is created with the last three (numeric) characters in sequence.
Note
When creating the effect in pair mode (see page 353), the files used must be
main files and sub files with the same last three (numeric) characters in the file
name.
To recall a continuous sequence of still images, create an effect in the user
region with the still image files as a keyframe, and run the created effect.
375
Still Image Operations