Sony DVS-9000 User Manual page 605

Knob Parameter
1 Transition
2 Curve
3 Random
3
To make wave settings for melting part, press [Border] and set the
following parameters.
Knob Parameter
1 Amp
2 Freq
3 a)
Offset
4
b)
Speed
5 Slant
a) Set when Lock is on.
b) Set when Lock is off.
To stop the waves in the melting part
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the shape of the part beginning to melt
Press [Form] and set the following parameter.
Knob Parameter
1 Form
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
Knob Parameter
1 Density
Adjustment
Degree of transition
Degree to which image stretches 0.00 to 100.00
Degree of jaggies at melted part
Adjustment
Amplitude of waves
Frequency of waves
Amount of wave phase offset
Direction and speed of waves
Slant of border
Adjustment
Waveform
Adjustment
Degree to which image
disappears
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–16.000 to +16.000
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
1 to 8
Setting values
0.00 to 100.00
DME Special Effect Operations
605