Sony DVS-9000 User Manual page 894

1
2
3
To check macro attachment settings
Hold down the [PRE MCRO] button or [POST MCRO] button. While it is held
down, buttons for which macro attachments are set flash as follows.
While the [PRE MCRO] button is held down:
While the [POST MCRO] button is held down:
Setting a macro attachment to a fader lever
You can set a macro attachment to any particular position of a fader lever in the
transition control block.
Notes
• In macro only mode it is not possible to set a macro attachment.
• It is not possible to set a macro attachment to a fader lever in the keyframe
• For a split fader, you can set a macro attachment to the main split fader.
For details of split faders, see Chapter 3, "Split Fader" (Volume 1).
1
2
894
Macro Attachment Assigning
Recall the macro register you want to assign to the button.
For details of recall, see page 850.
Press the button to which [MCRO ONLY SET] is assigned, turning it on.
Hold down the cross-point control block [PRE MCRO] button or [POST
MCRO] button, and press the desired button in the background A row.
The cross-point button you pressed flashes green, and the register you
recalled in step 1 is assigned to the button. The [MCRO ONLY SET]
button goes off.
Without switching to macro only mode in step 2, if you hold down the
[PRE MCRO] and [POST MCRO] buttons together and press the desired
button, it is possible to set a macro attachment in macro only mode for that
button.
• Buttons set in pre macro mode: flash amber
• Buttons set in macro only mode: flash green
• Buttons set in post macro mode: flash amber
• Buttons set in macro only mode: flash green
control block or downstream key control block.
Recall the macro register that you want to assign to the fader lever.
For details of recall see page 850.
Move the fader lever to the position where you want to set the macro
attachment.