Frame Memory Clip Operations; Preparations For Operation; Recalling Clips - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Frame Memory Clip Operations

For an overview of frame memory clip concepts, see "Frame Memory Clip

Function" (page 378).

During playback of a frame memory clip of the pair assigned to either of the

target FM selection buttons (see page 381), frame memory operations may not

be performed properly. Carry out frame memory operations after stopping clip

The preparations for using a frame memory clip (hereafter, a "clip") are the

same as for a still image operation. See "Preparations" (page 355) and

"Selecting Outputs and Target Frame Memory" (page 360).

Recalling a clip

You can recall a clip from each of frame memories 1 to 8.

In the Frame Memory menu, select VF2 'Clip' and HF1 'Recall.'

The Recall menu appears. (See following figure)

• When [Pair] is set to On, only pair files (sets of main file and sub file)

• When [Pair] is set to Off, both of single files and pair files are shown.