Saving, Canceling, And Deleting Edited Wipe Patterns - Sony DVS-9000 User Manual

Buttons for setting the wipe pattern limit
PTN LIMT (pattern limit): Enables the following settings for the pattern
LIMT SET (limit set): If you change the pattern size with the fader lever then
Knob
1
a) At 0%, executing the transition has no effect at all.
b) At 100%, the transition can be executed with the same effect as with no pattern limit set, but
Other buttons
EXIT: Exits the editing mode, and returns the memory recall section to wipe
KNOB 1/2: When the control knob adjustments are on two pages, this switches
Wipe modify clear
Press [Default Recall] at the lower left of the menu display, turning it on, then
press VF5 'Wipe' to return the wipe settings to their initial status.
For details of menu operations, see "Menu Operations" (page 120).

Saving, Canceling, and Deleting Edited Wipe Patterns

Saving the edited wipe pattern as a snapshot
Holding down the [WIPE] button, press the button in the memory recall section
for the register in which you want to save.
The button you pressed lights yellow.
Buttons for registers in which wipe snapshots are already saved light orange.
Canceling a saved wipe snapshot
To cancel a wipe snapshot
Immediately after saving, hold down the [STOR STAT] button and press the
[UNDO] button.
At other times, hold down the [STOR STAT] button, and press the button for
the register in which the wipe snapshot you want to cancel is saved.
308
Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
limit using the control knobs.
press this button, this sets the current size as the pattern limit.
Parameter
P
when the transition completes, background buses A and B are not interchanged.
snapshot mode.
between parameter group [1/2] and parameter group [2/2].
Adjustment
Pattern limit range
Setting values
a) b)
0 to +100 (%)