Sony DVS-9000 User Manual page 802

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Snapshot Operations in the Multifunction Flexi Pad Control Block

• When the reference region is M/E-x (x is a number) or P/P

• When the reference region is other than M/E-x or P/P, and effect

dissolve settings are possible

Add attributes with the following buttons.

[TEMP ATTR] button: Set a temporary attribute. Set this to Off to add

an attribute.

[EFF DISS] button: Add the effect dissolve attribute.

[DUR xxx] button: Set the effect dissolve duration.

The current setting is shown by "xxx." When you press this button, the

memory recall section switches to numeric keypad input mode, and

you can enter the setting value.

[AUTO TRNS] button: Add the auto transition attribute.

[XHLD xxx] button: Add the bus cross-point hold attribute.

The affected bus is shown by "xxx."

For details of attributes, see "Snapshot Attributes" (page 785).