Sony DVS-9000 User Manual page 523

Effects for entire image
Name
Defocus
(See page 560.)
Blur
(See page 563.)
Multi Move
(See page 565.)
Effects for video image
Name
Sepia
(See page 566.)
Mono
(See page 566.)
Posterization
(See page 567.)
Solarization
(See page 567.)
Effect/Image
Defocuses the whole image. The degree of defocusing can be set
simultaneously or separately for video and key signals. (However, when the
DME dedicated interface is used, the degree of defocusing can be set for
video signals only.) You can also cancel the black level leaking that occurs at
the edge of the screen when the Defocus effect is used.
Applies a rounded blurring to the whole image.
Shrinks the image and lines up a number of copies vertically and horizontally.
You can specify the center point of the shrinking, the shrinking ratio, and the
aspect ratio of the image screen.
Effect/Image
Overlays a specified color onto the image. You can adjust the sepia color that
is overlaid, and specify the degree of mixing between the original image and
the sepia image.
Converts the image into a monochrome image.
Coarsens the luminance gradations of the image, for a paintinglike effect.
Coarsens the chroma gradations of the image, for a paintinglike effect.
DME Special Effect Operations
523