Aux Panel-Less Function - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

a) Dual background bus mode (see below) can be selected.

Dual background bus mode

In this mode, the shifted signal on the background A row can be selected on the

key 1 row, and the shifted signal on the background B row can be selected on

the key 2 row.

To switch this mode on and off, it is necessary to assign this function to the

[PRE MCRO] button in the cross-point control block.

For details of the assignment operation, see "Overall Control Panel Settings

(Config Menu)" in Chapter 19 (Volume 3).

For the following switcher banks, dual background bus mode is not available.

• When set to "Dual M/E Assign"

• When M/E Config is set to "DSK"

AUX Panel-less Function

When using 24-column cross-point control blocks for the CCP-6224/CCP-

6324 Control Panel, you can use the key 1 and key 2 rows as the auxiliary bus

control block. This is called the panel-less function.

Preparations

Assign the function for switching to the AUX control mode to the [PRE

MCRO] and [POST MCRO] buttons. Hereafter this button is called the [AUX

CTRL] button.

In the source name display you can display either the source name or the bus

For details of how to make the assignment, see Chapter 19 "Control Panel

Setup (Panel)" (Volume 3).

Selecting the AUX bus

Switch the operation mode with the [AUX CTRL] button.

In the key 1 row, select the AUX bus for the operation.

In the key 2 row, select the desired signal.

Signal Selection