Cross-Point Control Block (Ccp-6224/6324) In The Aux Operating Mode - Sony DVS-9000 User Manual

Cross-Point Control Block (CCP-6224/6324) in the AUX
Operating Mode
On the CCP-6224/6324, when using a [24-
column] cross-point control block, if the
[PRE MCRO] button is assigned to switch
to AUX operating mode, by pressing this
AUX cross-point buttons
AUX CTRL (AUX control) button
6A/B bus control block
7Source/bus name displays
a AUX control block
This selects the AUX bus and the assigned
source signals.
This cross-point control block can be
switched to AUX control mode with the
[AUX CTRL] button, and the key 1 row
used as AUX delegation buttons, and the
key 2 row used as AUX bus cross-point
selection buttons, with the source name
display showing the source names or the
button you can switch the control block
button functions as follows, and select the
AUX bus and its source signals (AUX
panel-less function).
2AUX CTRL (AUX control) button
1 AUX control block
M/E M/E M/E
SHIFT
1 2 3
M/E M/E M/E
SHIFT
1 2 3
SHIFT
M/E M/E M/E
SHIFT
1 2 3
M/E M/E M/E
SHIFT
1 2 3
bus names (AUX panel-less function). To
use this function, the function for switching
to AUX control mode must first be assigned
to the [PRE MCRO] and [POST MCRO]
buttons.
For the method of making this assignment,
see Chapter 19 "Control Panel Setup
(Panel)" (Volume 3).
Names and Functions of Parts of the Control Panel
3DEST (destination) button
4KEY button
XPT
KEY3
HOLD
XPT
KEY4
HOLD
PRE POST
MCRO MCRO
MCRO
XPT
ATTCH
HOLD
ENBL
XPT
UTIL
HOLD
5AUX DSPLY (AUX
display) button
105