Creating And Saving A Master Timeline; Creating And Saving A Master Timeline Using The Buttons In The Numeric Keypad Control Block; Creating And Saving A Master Timeline Using The Buttons In The Multifunction Flexi Pad Control Block - Sony DVS-9000 User Manual

Creating and Saving a Master Timeline

Creating and Saving a Master Timeline Using the
Buttons in the Numeric Keypad Control Block
Creating and saving a master timeline
You can save region information (information on any regions, including the
register numbers associated with the regions) referred to as a master timeline
in a dedicated register. By recalling that register, you can manipulate the
regions and registers together.
1
2
3
4
5
6
7
766
Creating and Saving a Master Timeline
Press the [EFF] button, turning it on.
This assigns the numeric keypad control block to keyframe effect
operations.
Recall the register number of the effect you want to save on the master
timeline for each region. (See "Recalling a register from the numeric
keypad control block" (page 723).)
Of the region selection buttons, press those buttons for the regions you
want to save on the master timeline, turning them on.
Press the region selection button [MASTR], turning it on.
The display shows the number of the register last used for master timeline
register operation.
Press the [STORE] button, turning it on.
With the numeric keypad buttons, enter the number of the register in which
you want to save the master timeline.
To find an empty register, instead of entering a number, press the [.]
(period) button.
The display shows the register number. If the number is followed by a
letter "E," the register is empty.
Press the [ENTER] button.