Loading And Unloading Multitool - Siemens SINUMERIK 828D Operating Manual

Tool management
12.15 Working with multitool
12.15.6

Loading and unloading multitool

Procedure
Load a multitool into the magazine
Loading a multitool into a magazine
Unloading a multitool
726
1. The tool list is opened.
2. Position the cursor at the multitool that you wish to load into the
magazine.
3. Press the "Load" softkey.
The "Load to" window opens.
The "... location" field is pre-assigned with the number of the first
empty magazine location.
4. Press the "OK" softkey to load the multitool to the recommended
empty location.
- OR -
Enter the location number you require and press the "OK" softkey.
The multitool together with the tools in it is loaded to the specified
magazine location.
2. Position the cursor on the required empty magazine location.
3. Press the "Load" softkey.
The "Load with." window opens.
4. Select the required multitool.
5. Press the "OK" softkey.
2. Position the cursor on the multitool that you wish to unload from
the magazine.
3. Press the "Unload" softkey.
The multitool is removed from the magazine and is saved in the
NC memory at the end of the tool list.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning