Siemens SINUMERIK 828D Operating Manual page 428

Programming technology functions (cycles)
9.3 Contour turning
Parameter Description
ZD - (only for ∇ machining)
- (only for blank description, cylinder and allowance)
•
•
Allowance Allowance for pre-finishing - (only for ∇∇∇)
•
•
U1 Compensation allowance in X and Z direction (inc) – (only for allowance)
•
•
* Unit of feedrate as programmed before the cycle call
Hidden parameters
Parameter Description
Residual material With subsequent residual material removal
SC Safety clearance
DI Continuous cut - (only for ∇)
Set machining area Set machining area limits
limits
N Number of grooves
428
For blank description, cylinder
– Version, absolute:
Cylinder dimension (abs)
– Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For blank description, allowance
– Allowance on the CYCLE62 finished part contour (inc)
Yes
U1 contour allowance
No
Positive value: Compensation allowance is kept
Negative value: Compensation allowance is removed in addition to finishing
allowance
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Value Can be set in SD
No
0
No
1
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
Turning