Siemens SINUMERIK 828D Operating Manual page 101

Tailstock
Dimensioning the main spindle tailstock
Procedure
See also
Machining with movable counterspindle (Page 601)
Parameter Description
Main spindle
Dimensions of the forward edge or stop edge
Jaw type 1
•
Jaw type 2
•
ZC1 Main spindle chuck dimensions (inc)
ZS1 Main spindle stop dimensions (inc)
ZE1 Jaw dimension, main spindle (inc) - only for "Jaw type 2"
XR Tailstock diameter - only for tailstock that has been set-up
ZR Tailstock length - only for tailstock that has been set-up
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Spindle chuck data" softkeys.
The "Spindle Chuck Data" window opens.
3. Enter the desired parameter.
The settings become active immediately.
3.9 Monitoring axis and spindle data
Dimensioning the counter-spindle tailstock
Setting up the machine
Unit
mm
mm
mm
mm
mm
101