Programming technology functions (cycles)
9.1 Drilling
Figure 9-3
See also
Positions and position patterns (Page 335)
Procedure
338
Y axis is traversed (Y0, Y1)
1.
The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Positions" and "Arbitrary positions" softkeys.
The "Positions" input window opens.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning