Tool management
13.14 Working with multitool
13.14.5
Deleting multitool
Procedure
13.14.6
Loading and unloading multitool
Procedure
Unloading a multitool
576
1.
The tool list is opened.
2.
Position the cursor on the multitool that you wish to delete.
3.
Press the "Delete multitool" softkey.
The multitool with all of the tools that are located in it is deleted.
1.
The tool list is opened.
2.
Position the cursor at the multitool that you wish to load into the
magazine.
3.
The "Load to" window opens.
The "... location" field is pre-assigned with the number of the first
empty magazine location.
4.
Press the "OK" softkey to load the multitool to the recommended
empty location.
- OR -
Enter the location number you require and press the "OK"
softkey.
The multitool together with the tools in it is loaded to the
specified magazine location.
1.
Position the cursor on the multitool that you would like to unload
from the magazine and press the "Unload" softkey.
The multitool is removed from the magazine and is saved in the
NC memory at the end of the tool list.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning