Programming technology functions (cycles)
9.7 Additional cycles and functions in ShopTurn
Parameter
Work offset
Write to the
work offset
ZV - only for work offset
write "yes"
Z4P
Parameter
Function, gripping
Gripping a blank
Work offset -
only for "with main
spindle"
Coordinate
system
XP
ZP
606
Description
Work offset in which the coordinate system, which was shifted according to ZW
and by ZV as well as mirrored in Z, must be saved:
Basic reference
G54
•
G55
•
G56
•
G57
•
...
•
Yes
•
The Z value of the work offset can be directly written to the input screen
form.
No
•
The actual Z value of the work offset is used.
Offset Z = 0 (abs)
•
Workpiece zero is offset in Z direction (inc, the sign is also evaluated)
•
Machining position for special axis (abs.); machine coordinate system
Description
Teaching in the park position and angular offset is possible
With main spindle
•
The blank is gripped with the main spindle
With counter-spindle
•
The blank is gripped with the counter-spindle
Buffer work offset:
Basic reference
•
G54
•
G55
•
G56
•
G57
•
...
•
MCS
•
The park position is specified in the machine coordinate system. Teaching in
the park position and angular offset is only possible in the machine coordinate
system.
WCS
•
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
Unit
mm
mm
Turning