Accepting parameters
When you have correctly entered all necessary parameters, you can close the window and
save your settings.
You cannot accept the parameters if they are incomplete or obviously erroneous. In this
case, you can see from the dialog line which parameters are missing or were entered
incorrectly.
2.4.8
Pocket calculator
Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Close the value entry using the <INPUT> key and the result is trans-
ferred into the field.
Press the "OK" softkey.
- OR -
Press the "Accept" softkey.
1.
Position the cursor on the desired entry field.
2.
Press the <=> key.
The calculator is displayed.
3.
Input the arithmetic statement.
You can use arithmetic symbols, numbers, and commas.
4.
Press the equals symbol on the calculator.
- OR -
Press the "Calculate" softkey.
- OR -
Press the <INPUT> key.
The new value is calculated and displayed in the entry field of the calcu-
lator.
5.
Press the "Accept" softkey.
The calculated value is accepted and displayed in the entry field of the
window.
Introduction
2.4 User interface
53