Editing The Multi-Channel Program; Changing The Job List - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Editing the multi-channel program

You now have the option to change the composition of the programs and/or the assignment

of the channel and program in a job list.

Precondition

● "programSYNC" option

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Select the "Program Manager" operating area.

Select where the multi-channel program should be archived

Position the cursor in the "Workpieces" folder on a job list and press the

"Open" softkey.

The window "Job list * JOB" is opened and the program assignment to

the channels is displayed.

Select the channel to which you wish to assign a new program and

press the softkey "Select program".

The "Program" window is opened and displays all of the programs cre-

ated in the workpiece.

Press the "Open job list" softkey.

Multi-channel machining

10.2 Multi-channel support

Sinumerik 840d sl