Siemens SINUMERIK 828D Operating Manual page 52

Introduction
2.4 User interface
Changing or calculating parameters
If you only want to change individual characters in an input field rather than overwriting the
entire entry, switch to insertion mode.
In this mode, you can also enter simple calculation expressions, without having to explicitly
call the calculator. You can execute the four basic calculation types, work with expressions in
brackets as well as generate square roots and squares.
Note
Generating square roots and squares
The extract roots and generate square functions is not available in the parameter screens of
the cycles and functions in the "Program" operating area.
52
Press the <INSERT> key.
The insert mode is activated.
You can navigate within the input field using the <Cursor left> and <Cur-
sor right> keys.
Use the <BACKSPACE> and <DEL> key to delete individual characters.
+ <*> Enter the multiplication characters using the <SHIFT> + <*> keys.
+ </> Enter the division character using the <SHIFT> + </> keys.
Enter bracket expressions using the <SHIFT> + <(> and <SHIFT> + <)>
keys.
+ <)>
+ <number> Enter "r" or "R" as well as the number x from which you would like to
extract the root.
+ <number> Enter "s" or "S" as well as the number x for which you would like to gen-
erate the square.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning