Machining the workpiece
5.7 Starting machining at a specific point
Note
Search mode for ShopTurn programs
• The search variant for the ShopTurn machining step programs can be specified via MD
51024. This applies only to the ShopTurn single-channel view.
References
For additional information, please refer to the following documentation:
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
Procedure
138
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Machine" operating area.
2.
Press the <AUTO> key.
3.
Press the "Block search" and "Block search mode" softkeys.
The "Search Mode" window opens.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning