Repeating Positions - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Programming technology functions (cycles)

9.1 Drilling

Repeating positions

If you want to approach positions that you have already programmed again, you can do this

quickly with the function "Repeat position".

You must specify the number of the position pattern. The cycle automatically assigns this

number (for ShopTurn). You will find this position pattern number in the work plan (program

view) or G-code program after the block number.

Repeat jump label for position

(only for G code)

Position (only for

Enter the number of the position pattern

The part program or ShopTurn program to be processed has been cre-

ated and you are in the editor.

Press the "Drilling", and "Repeat position" softkeys.

The "Repeat positions" input window opens.

After you have entered the label or the position pattern number, e.g. 1,

press the "Accept" softkey. The position pattern you have selected is

then approached again.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Sinumerik 840d sl